SINGLE Wire Braid
Hydraulic Hose
111 Single Wire Braid - SAE 100R1AT
111 is a medium pressure, single wire hose which meets the requirements of SAE 100R1AT and EN 853-1SN. The hose is ideally suited for medium pressure hydraulic oil lines, return lines, grease lines, water lines and power steering hoses. This hose has an MSHA approved cover for flame retardance in underground mining applications.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | One steel wire braid |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
111SN Single Wire Braid - SAE 100R1AT
111 is a medium pressure, single wire hose which meets the requirements of SAE 100R1AT and EN 853-1SN. The hose is ideally suited for medium pressure hydraulic oil lines, return lines, grease lines, water lines and power steering hoses.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | One steel wire braid |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
DOUBLE Wire Braid
Hydraulic Hose
122 Double Wire Braid - SAE 100R2AT - MSHA Cover
111 is a medium pressure, single wire hose which meets the requirements of SAE 100R1AT and EN 853-1SN. The hose is ideally suited for medium pressure hydraulic oil lines, return lines, grease lines, water lines and power steering hoses. This hose has an MSHA approved cover for flame retardance in underground mining applications.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Two steel wire braids |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
122SN Double Wire Braid - SAE 100R2AT
122SN is a high pressure, two wire braid hose which meets the requirements of SAE 100R2AT & EN 853-2SN.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Two steel wire braids |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
109/112 Constant Pressure SAE 100R17
Two of our special wire braid products combine to cover the 3000 psi requirements set out by SAE 100R17. Engineers can specify SAE 100R17 hoses and know that the pressure rating will be 3000 psi regardless of diameter.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | One or two high tensile steel wire braids. |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
112 High-Pressure Double Wire SAE 100R16 (Slim Diameter)
Working pressures of this two wire braid hose exceed requirements of SAE 100R2 while retaining the benefits of SAE 100R1 dimensions. 112 meets the SAE 100R16 specification and offers superior flexibility and a minimum bend radius less than either SAE 100R1 or SAE 100R2 hose. 112 has become a popular choice of original equipment manufacturers since it is lighter weight and easier to route in tight spaces than conventional hoses.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Two high tensile steel wire braids |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
113 Ultra-Pressure Double Wire
The high-tensile wire used in the reinforcement of 113 hose provides higher working pressures than most other braided hoses. 113 is used for high pressure where the extra flexibility of a spiral reinforced hose is not required.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | One steel wire braid |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F) |
Four Spiral Hydraulic Hose
115 Heavy Four Spiral - EN 856 4SP/4SH
115 is a very popular hose on European and Asian equipment. It offers very high pressure in a compact construction. In 3/8" and 1/2", the hose conforms to 4SP specifications. In 3/4" and up 115 meets the higher pressure requirements of 4SH.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Four spiral plies of high tensile steel wire |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. |
| Temperature Range: | -40° to 100°C (-40° to 212°F) P petroleum based fluids intermittent to 125°C (257°F). |
124 Four Spiral Wire - SAE 100R12 - Grey Cover
124 is an extremely flexible hose designed to operate at high working pressures found on modern construction, marine, mining, and forestry equipment. This hose is available in long lengths up to 131 feet (longer in sizes up to 1"). Over the cover couplings are among those recommended for 124.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Four spiral plies of high tensile steel wire |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 121°C (-40° to 250°F). |
EXTREME PRESSURE SPIRAL Hydraulic Hose
136 5000 psi SAE 100R13
This multi-spiral hose is used in severe pressure applications where high working pressures and superior resistance to impulsing are required. 136 is commonly used on heavy mobile equipment and has a red rubber cover for easy identification. The hose has a four spiral wire reinforcement in size -12 and -16 and six spiral wire plies in larger sizes.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Four or six spiral plies of high tensile steel wire. |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 121°C (-40° to 250°F). |
156 6000 psi SAE 100R15
Recommended for extremely high pressure and high impulse applications. This robust hose exceeds the requirements of SAE 100R15 and is often found in use on hydrostatic transmissions.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Six spiral plies of high tensile steel wire above 1”. Four plies in 1”. |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber. MSHA approved |
| Temperature Range: | -40° to 121°C (-40° to 250°F). |
Truck hydraulic Hose
151 SAE 100R5 Fabric Cover
151 is a single wire braid hose with a rubber impregnated polyester fabric braid cover. While not generally as abrasion resistant as neoprene, the polyester cover does allow for greater ambient heat resistance. This hose can be used for hydraulic fluids, lubricating oils, diesel, air and water. 151 is most commonly used in heavy-duty commercial vehicle applications such as air brake, power steering, fuel filter, turbocharger oil supply, tilt cab cylinders, transmission/ engine coolant and oil filtration lines. 151 meets the requirements of J1402 All and DOT FMVSS 106-74 Type AII for air brake applications in sizes up to 5/8" inside diameter.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | One steel wire braid |
| Cover: | Mildew, oil and heat resistant rubber impregnated black polyester fabric braid cover |
| Temperature Range: | -40° to 125°C (-40° to 257°F) Air to 70°C (158°F) |
151H SAE 100R5 High Temperature
151H is a single wire braid hose and a rubber impregnated blue polyester fabric braid cover. Though 151 is similar, 151H uses a special tube compound that offers superior cold and hot temperature resistance. This hose can be used for hydraulic fluids, lubricating oils, diesel, air and water. 151H is most commonly used in heavy duty commercial vehicle applications such as air brake, power steering, fuel filter, turbocharger oil supply, tilt cab cylinders, transmission/engine coolant and oil filtration lines. 151H meets the requirements of J1402 and DOT FMVSS 106 Type All for air brake applications.
| Tube: | Seamless oil resistant cpe rubber (chlorinated polyethylene) |
| Reinforcement: | One steel wire braid |
| Cover: | Mildew, oil and heat resistant rubber impregnated blue polyester fabric braid cover |
| Temperature Range: | -49° to 150°C (-55° to 302°F) Air to 120°C (248°F) |
Thermoplastic Hydraulic Hose
172 SAE 100R7 Black Thermoplastic
This medium pressure polyurethane covered hydraulic hose offers excellent flexibility and resistance to a wide range of chemicals and petroleum base products. 172 hose is commonly used in construction equipment, lubrication lines and hydraulic lift equipment. The polyester tube provides excellent low temperature flexibility.
| Tube: | Polyester |
| Reinforcement: | Braided polyester |
| Cover: | Black, polyurethane, pin-pricked |
| Temperature Range: | -40° to 93°C (-40° to 200°F). |
172N SAE 100R7 Orange Non-Conductive
The non-conductive version of 172 has an orange, non pin-pricked cover that meets SAE J517 non-conductivity requirements. This hose is a favorite choice for telephone and power line servicing vehicles and other hydraulic lifts due to it's electrical non-conductivity.
| Tube: | Polyester |
| Reinforcement: | Braided polyester |
| Cover: | Orange, polyurethane |
| Temperature Range: | -40° to 93°C (-40° to 200°F). |
172T… SAE 100R7 Twin-Line
172T is two lines of 172 bonded together during the manufacturing process. The hose is used in many of the same applications as the single line, but where two hydraulic lines are required. This hose is most commonly found on forklifts and mobile hydraulic lifts. Nonconductive twin line is also available on request.
| Tube: | Polyester |
| Reinforcement: | Braided polyester |
| Cover: | Black, polyurethane, pin-pricked |
| Temperature Range: | -40° to 93°C (-40° to 200°F). |
182 SAE 100R8 Thermoplastic
SAE 100R8 offers similar features to 172 but with a higher working pressure. The use of high-tensile aramid fibre allows for a compact and flexible design.
| Tube: | Polyester |
| Reinforcement: | Braided aramid fibre |
| Cover: | Black, polyurethane, pin-pricked |
| Temperature Range: | -40° to 93°C (-40° to 200°F). |
116 Extreme Pressure Polyurethane Hose
124 is an extremely flexible hose designed to operate at high working pressures found on modern construction, marine, mining, and forestry equipment. This hose is available in long lengths up to 131 feet (longer in sizes up to 1"). Over the cover couplings are among those recommended for 124.
| Tube: | Polyamide (Nylon) |
| Reinforcement: | Two spiral layers of wire and one wire braid |
| Cover: | Black polyurethane |
| Temperature Range: | -40°C (-40°F) to 100°C (212°F). |
PUSH-ON & SUCTION Hose
102 Rubber Covered Push-On
Our standard push-on has an oil resistant tube that is also compatible with diesel fuel and gasoline. We offer standard black cover, plus blue (102B) and grey (102G) in 250 & 700 foot reels.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Spirals of synthetic textile |
| Cover: | Oil, abrasion and weather resistant black synthetic rubber. Also available in blue & grey. |
| Temperature Range: | -35° to 80°C (-31° to 176°F) |
141 SAE 100R4 Suction/Return
141 is designed for hydraulic suction and low pressure return lines where petroleum or water base fluids are being used. The high grade nitrile rubber tube offers superior resistance to the softening and swelling caused by high temperature oils. 141 is manufactured with a double helix wire reinforcement allowing full vacuum service.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Textile cords and high tensile steel helix wire |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F). |
Specialty Hose
111-03MM Grease Hose Assemblies
PULSAR grease whip hose assemblies are durable and flexible connecting hoses for hand grease gun applications. The rubber hose is PULSAR 3/16" I.D. 3,600 psi working pressure SAE 100R1AT single wire hose. The couplings are factory crimped brass 1/8" male NPTF couplings. Special order lengths are also available.
120J Jack Hose
A typical jack hose is 1/4" I.D. with 3/8" male NPT ends, usually 6
feet long. One NPT end threads into the hydraulic hand pump, while
the other end usually has a C302-06 quick coupling male attached. A
C301-06 female coupler is typically threaded into the ram.
Remember that even though 120J Jack Hose is rated for 10,000
psi, jacking applications are static pressure situations at ambient
temperature. DO NOT USE jack hose for impulsing or regular hydraulic
applications.
Many manufacturers claim that their jack hose meets the Material
Handling Institute IJ100 standard for jack hose. In fact this standard
was withdrawn several years ago and is no longer in effect.
| Tube: | Seamless oil resistant nitrile rubber |
| Reinforcement: | Two high tensile steel wire braids. |
| Cover: | Oil, abrasion and weather resistant black neoprene rubber |
| Temperature Range: | -40° to 100°C (-40° to 212°F) Petroleum base fluids intermittent to 125°C (257°F). |
157 SAE 100R14 Teflon® Hose
TeflonŽ hoses were designed to replace copper tube in high temperature flexing applications where rubber hose would fail. They have a TeflonŽ tube with a stainless wire cover and are commonly used for compressor discharge lines on mobile air brake systems. 157 is also used in many chemical applications.
| Tube: | Extruded Teflon® |
| Reinforcement: | One high-tensile Type 304 stainless steel wire braid |
| Temperature Range: | -54° to 232°C (-65° to 450°F) Intermittent -73° to 260°C (-100° to 500°F). |